CHLORINE

1. When Starting Up your spa add 1.5 Teaspoons of SpaEase Chlorine Granules for every 300 gallons of water. Make certain spa pump is on.

2. Test water every 15 minutes and repeat until chlorine residual reaches 3 – 5 ppm. (This can be reduced to 1 -3 ppm if you are using a SpaEase Mineral Purifier Stick.

3. Add 2 oz. of SpaEase Activator each time after using your spa with 1-2 adults. Add 2 oz. weekly if the hot tub was not in use.

4. Test water every other day and add SpaEase Chlorine Granules as needed.

NOTE: Do not enter water where the residual exceeds 5 ppm. If necessary drain some of your water and add new water to lower chlorine level.

BROMINE TABLETS

1. Each time you refill your hot tub with new water or if you allow you bromine level to drop to “0” add 2 oz. of SpaEase Activator and 2 oz. SpaEase Brom Bank for every 300 gallons of water to help you quickly achieve a bromide level of 2 to 3 ppm. Make certain spa pump is on. Wait 15 minutes, test water with Frog Test Strips and add more SpaEase Brom Bank if required. Bromide Level can be reduced to 1 to 2 ppm if you are using the SpaEase Mineral Purifier Stick.

2. Place 3 tablets into Bromine Floating Dispenser with levels ½ open for normal use.

3. Add 2 oz. of SpaEase Activator each time after using your spa with 1-2 adults. Add 2 oz. weekly if the spa is not in use.

4. Add 3 tablets every 5 to 7 days to maintain proper bromine level. If you allow bromine level to drop to “0” then repeat Step 1 above.

Remember to follow instructions on “Balancing Your Water” and “Weekly Maintenance”

Note: 2 ounces = ¼ Cup     2.2 lb. of Spa Activator = 35.2 ounces = Approximately 18 doses